Description
MODEL: BIP STOP
APPLICATION:
+ Clear, clean liquid, rain water, wastewater,…;
+ Slightly aggressive liquid (oil, sludge, paint,…;
+ Overflow or dry-running protection;
+ High/low level alarm
TECHNICAL CHARACTERISTICS:
+ Type: float
+ Allowed fluid densitie: 0,70 à 1,15 g/cm³
+ Electric characteristic: 250 VCA /VCC 50/60 Hz
+ Maximum temperature: 85oc
+ Maximum pressure: 3.5 bars
+ Switching angle: 110o
+ Protection index: IP68
+ Material of housing: Copolymer polypropylene
+ Material of cable: Neoprene
+ Float weight without cable: 105gr
+ Length of cable: 3, 5, 10, 20 m
Thanks to its wide switching angle of 110º, BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, BIP STOP can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
MODEL: SOBA HRHY
APPLICATION:
+ This float level switch is a heavy duty float level switch designed for aggressive liquids. It is encased in a HR HY pressvulcanized housing, which ensures a double waterproof, can ensure a regulation in very aggressive liquids such as acid, bazo, sea water,....
TECHNICAL CHARACTERISTICS:
+ Type: float
+ Allowed fluid densitie: 0,80 à 1,10 g/cm³
+ Electric characteristic: 12, 24, 48 VCA /VCC – 250 VCA - 50/60 Hz
+ Maximum temperature: 90oc
+ Maximum pressure: 4.0bars
+ Switching angle: ± 25o
+ Protection index: IP68
+ Material of housing: Copolymer polypropylene
+ HRHY+ Material of cable: HRHY
+ Float weight without cable: 295gr
+ Length of cable: 1, 3, 5, 10, 15, 20 m
The SOBA HR HY level regulator are equipped with an external loaded resin ballast 250gr , adjustable on the cable, which facilitates the rotation point of the level sensor and allows it to work in a wide range of densities.Thanks to its +/- 25º switching angle, it ensures a very precise level measurement. The device can also be used in high or low alarm (overfill protection or protection against idling). If your installation is located in a hazardous area, choose our ATEX certified float switch SOBA EX.
MODEL: ATS 165EP
APPLICATION
+ For drinking water.
+ This ACS certified float level switch is constructed with special components for use in drinking water applications.
TECHNICAL CHARACTERISTICS:
+ Type: float
+ Allowed fluid densitie: 0,70 - 1,10 g/cm³
+ Electric characteristic: 250 – 400 VCA /VCC 50/60 Hz
+ Maximum temperature: 85oc
+ Maximum pressure: 3.5 bars
+ Switching angle: ± 165o
+ Protection index: IP68
+ Material of housing: Copolymer polypropylene
+ Material of cable: EPDM
+ Float weight without cable: 325gr
+ Length of cable: 5, 10, 15, 20, 25, 30 m
Thanks to its big switching angle of 165º, the ATS 165 protects the pump's engine and the electrical panels from jerking. This float the ideal solution for level control in tower tanks, for example.